The Single-Sided Enzo-Style Key for 1964 to 1988 Ferrari's

The single-sided Enzo-style Ferrari key for a Ferrari made between 1964 and 1988 has the same unsurpassed quality as our double-sided Enzo-style key.  Instantly recognizable as the key for your Ferrari motor car.

Ferrari is registered trademark of Ferrari N.V.  The use of the name does not imply any affiliation or association with or an endorsement by Ferrari, or any of its subsidiaries or its affiliates.

Enzo-Style Keys for Ferrari's in Model Years 1964 to 1988

The Klassik Ferrari^® Key for Ferrari's made before 1989

The manufacturing process for the single-sided key designed to fit Ferrari's made between 1964 and 1989 is identical to the Double-Sided Enzo-style key.  They are made entirely in the USA using high quality materials and manufacturing methods.  The key blank is nickel-plated brass.  The key shank is completely encapsulated in 100% solid acrylic polycarbonate. The key is very high quality and will retain its good looks for a long time.

• Solid key head - not a hollow plastic shell
• No paint or coating to chip or peel
• Should minor scratches develop, they can be polished out using a polish designed for acrylic plastic

Available in Red Only

This Enzo-Style Ferrari Keys is only available red.  The recessed portion on the front surface of the key head is sized to inlay a small metal ornament similar to this.  Cast in zinc alloy and electroplated with bright nickel.  The metal ornament is included with the key and is bonded in place, partially inlaid into the plastic surface.  The top surface of the metal ornament is slightly raised above the surface of the key head providing tactile feedback as you pass your finger over it.

We did not cut any corners on quality during development and manufacturing.  The Klassik Car Key is solid and beautiful  - made entirely in the USA using the best available materials.  It will be a beautiful compliment to your car.  Your key will be instantly recognized as a "Ferrari key".  No compromises have been taken in making the Klassik Car Key.  You feel it the moment you pick it up.  The head of the key is solid acrylic resin.  There will be a reassuring solid feel to the key.  The acrylic surface is high gloss.  There is no paint or surface treatment that will chip or peel.  And, should minor scratches occur over time, you can polish it using a plastic polishing compound.  We challenge you to compare the key to any other key for Ferrari - including an original key from the manufacturer.

The black center section solidly encapsulates the key - the key will never get loose.  The over-molding process eliminates any possibility of the key head coming apart.

A characteristic of acrylic resin thermoplastic is that you can polish and buff the surface to a high luster.  Using a soft cloth and a polishing compound designed for plastics, you can remove minor scratches that may occur over time and keep your Klassik Car Key in like new condition.

The Klassik Car Key does not have any built-in electronics.  There are no buttons, no electronics.

Vehicle Compatibility *

The Ferrari Key by Klassik Car Keys is compatible with the following Ferrari motor cars manufactured from 1964 to 1989.  See the note below. Actual fit should be determined prior to cutting the key.  Go to the FAQ page for more details on compatibility.

• Dino 206
• Dino 246
• Dino 308
• Ferrari 208
• Ferrari 275
• Ferrari 288 GTO
• Ferrari 308
• Ferrari 328
• Ferrari 330
• Ferrari 365
• Ferrari 400 / 400i
• Ferrari 412
• Ferrari 512 BB
• Ferrari F40
• Ferrari F50
• Ferrari Mondial 8 / QV / 3.2

Please note.  Ferrari used up to three key masters during this period.  The most common key was the Neiman key which is same as the Ilco H61VR or the Silca NE9A ... But during this period, especially for the 365 and 400, the Silca BW3 key may have also been sourced ... The two above keys have different profiles.  If your original key appears as shown for the Silca NE9A, then the Klassik Car Key should be a good fit. Original keys for these classic cars are only available private sources.  The manufacturer of the keys no longer provides original keys and they are not available from Ferrari. The Enzo-syle Klassik Car Key is a distinctive and updated design that you will be proud to use and show.  As it has solid key head, there is no paint that will ever chip or wear away.  The key will retain its good appearance for years of use - and minor scratches can easily be removed by polishing the surface of the key head using a suitable plastic polish and polishing cloth.

Easily Fitted to your Car

The Ferrari Key is uncut.  A local lock smith or hardware shop can use your original key to duplicate onto the Ferrari Key using a traditional edge-cut key duplicating machine.

Risk-free Purchase

Your purchase is risk-free.  As long as you have not cut the Klassik Car Key, we will accept returns.